What Does the Annotation Scale Do to an Uploaded Linetype Such as Center or Dashed?

Linetype is a visual property assigned to geometric objects. Linetypes can be a pattern of dashes, dots, text, and symbols, or unbroken and continuous.

The current linetype setting defines the default appearance of all new geometric objects. You tin can meet which linetype is current in the Properties panel of the ribbon Habitation tab when no objects are selected.

• The Continuous linetype displays objects with a solid, unbroken design.
• The ByLayer linetype displays objects with the linetype assigned to the electric current layer.
• An explicitly set linetype, for case DASHDOT, displays objects with that linetype regardless of the current layer.
• The ByBlock linetype displays objects with the Continuous linetype until the objects are combined into a cake definition. When the cake is inserted into the drawing, it displays the current linetype for those objects.

Load Linetypes

Before you can apply unlike linetypes, y'all must load them in the drawing with the Linetype Director. Find

For linetypes that you employ frequently, you lot tin can load them in a template drawing. And so when you create drawings from the template, the linetypes are already loaded.

Linetypes are defined in a linetype definition (LIN) file. When you load a linetype, you lot select the linetype definition file and a specific linetype from within that file. Two linetype definition files are available: acad.lin for imperial units, and acadiso.lin for metric units.

Note: Due to scaling, practice not mix majestic and metric linetypes in the same drawing.

You can remove unreferenced linetype definitions from a cartoon with the PURGE control, or from the Linetype Managing director. The BYBLOCK, BYLAYER, and CONTINUOUS linetypes cannot be removed.

Linetype Calibration

Linetype calibration controls the size and spacing of repetitions of the linetype blueprint for each cartoon unit. At that place are a number of scaling options that can affect how linetypes brandish and plot.

Global Scale Factor

The global calibration factor affects the appearance of all the linetypes in the drawing. You lot tin fix the global scale factor past irresolute the LTSCALE organisation variable at the Command prompt or with the Linetype Manager. The default global scale cistron is 1.0. The smaller the scale factor, the more than repetitions and the smaller the spacing in each linetype blueprint.

If you change the global calibration factor, the appearance of all the linetypes in the cartoon modify.

Current Object Scale

The current object scale, also called the current linetype scale, controls the linetype scale for new objects. You can set the electric current object scale by changing the CELTSCALE system variable or with the Linetype Director. The default current object scale is 1.0. When you create geometry, the current object scale value becomes the object'southward linetype calibration belongings. You lot can change the linetype scale of an existing object in the Properties palette.

The linetype scale for objects is based on both the global scale factor, and the linetype calibration property. A line created with CELTSCALE = 2 in a cartoon with LTSCALE set to 0.five would appear the same every bit a line created with CELTSCALE = 1 in a drawing with LTSCALE = ane.

Paper Infinite Linetype Scale

When you work in paper space the layout viewports might be set to dissimilar scales. When yous plot from paper space, set the PSLTSCALE system variable to 1 to plot all linetype patterns consistently betwixt viewports regardless of scale. If PSLTSCALE is set to 0, all linetypes use the global setting of LTSCALE.

Model Space Linetype Scale

When you work in the Model tab, the annotation scale tin affect linetype scaling. If you do not want the annotation scale to touch linetypes when plotting from the Model tab, prepare the MSLTSCALE organisation variable to 0. The default value of MSLTSCALE is 1.

Linetype Calibration and Brusque Segments

If the linetype of an object looks solid even though you assigned a linetype with a pattern, you lot may need to specify a different linetype scale for the object.

You lot tin modify the linetype scale of the object in the Properties palette to get the desired look.

Linetypes and Polyline Vertices

For polylines, y'all can specify whether a linetype blueprint is centered on each segment or is continuous across vertices throughout the entire length of the polyline.

Employ the PLINEGEN system variable to specify this option for new objects. Y'all can update existing polylines on the Properties palette in the Linetype Generation setting.

numbersspleace87.blogspot.com

Source: https://knowledge.autodesk.com/support/autocad/learn-explore/caas/CloudHelp/cloudhelp/2020/ENU/AutoCAD-Core/files/GUID-20B4D4B3-1220-426A-847B-5BBE36EC6FDF-htm.html